HP/Agilent E5100A High-Speed Network Analyzers, 10 KHz to 180 MHz or 300 MHz

The Agilent E5100A network analyzer is a 10 kHz to 180 MHz or 300 MHz network analyzer best fitted for production lines of electronic component manufacturers, especially resonator and filter manufacturers, who require extra-high throughput. The Agilent E5100A improves production line productivity with its fast measurement speed (fastest sweep speed is 0.04 ms/point), fast waveform analysis commands, and high speed processor. It provides faster measurements with lower fluctuations because of its low-noise performance and fine selection IFBW.

HP/Agilent E5100A Features

• 10KHz - 180MHz or 300MHz
• 0.04 ms/point measurement speed
• High speed filter and resonator evaluation using waveform analysis commands
• IBASIC for easy automation
• Phase Tracking Function for high speed evaluation of resonator (OPTION)
• Evaporation monitoring function (option)
  HP/Agilent E5100A Standard Accessories
  The following items are shipped by Equipment Management Technology with each unit ordered.
  

  Part Number	Description	Qty
  	Power Cable	1
  E5100-90025	BASIC User's Handbook	1
  E5100-90070	Function Reference	1
  E5100-90087	Programming Manual	1
  E5100-90130	Service Manual	1
  E5100-90051	User's Guide	1

  OPTIONS***

  Option	description
  001	One RF OUT Port
  002	Two RF OUT Ports, Built-in Power Splitter
  003	Two RF OUT Ports, Switched Single Output
  005	Parallel I/O Mode A
  006	Parallel I/O Mode B
  007	Opto-Isolated Parallel I/O
  022	Evaporation Monitoring Function
  023	Phase Tracking Function for 300 MHz ver.
  100	300 MHz, 1 Receiver, Port A
  118	180 MHz, 1 Receiver, Port A
  1D5	High Stability Frequency Reference
  1CM	Rack Mount Kit (5062-3978)
  1CN	Front Handle Kit (5062-3990)
  1CP	Rack Mount and Handle Kit (5062-3984)
  1F0	External Keyboard
  200	300 MHz, 2 Receivers, Ports R and A
  218	180 MHz, 2 Receivers, Ports R and A
  300	300 MHz, 3 Receivers, Ports R, A and B
  318	180 MHz, 3 Receivers, Ports R, A and B
  400	300 MHz, 4 Receivers, Ports R, A, B and C
  600	300 MHz X'tal Resonator Test to use w/PI-Network
  618	180 MHz X'tal Resonator Test to use w/PI-Network
  701	BNC Input Connector (50 Ohm) on Port A
  702	BNC Input Connector (50 Ohm) on Port A and B
  703	BNC 50/1 Mohm Selectable Input on Port A
  704	BNC 50/1 Mohm Selectable Input on Port A and B
  705	Type N 50-Ohm Input Connector on Port A
  706	Type N 50-Ohm Input Connector on Port A and B
  707	Type N 50/1 Mohm Selectable Input on Port A
  708	BNC 50/1 Mohm Selectable Input on Port A and B
  800	Standard Frequency Reference
  801	Power Extended One RF OUT Port
  802	Power Extended Two RF OUT Ports, Built-in Power Splitter
  803	Power Extended Two RF OUT Ports, Switched Single Output
  804	Parallel I/O Standard
  823	Phase Tracking Function for 180 MHz ver.
  UKR	Delete Instrument BASIC