HP/Agilent 8546A EMI Receiver, 9 kHz to 6.5 GHz (85462A & 85460A)

The Agilent 8546A EMI test receiver makes CISPR-based EMI measurements with unprecedented accuracy, speed, and ease of use. It is fully CISPR 16-1 compliant, and can be used to check conformance to any civilian EMI standard, including CISPR, EN, FCC, VCCI, and VDE. With an upper frequency of 6.5 GHz, the Agilent 8546A can test the newest high-speed ITE equipment. The Agilent 8546A works with our PC-based EMI measurement software (Agilent 85875A or 85876B) to create the most powerful, easiest-to-use automated solution available for commercial radiated and conducted emission testing.

This unit consists of the 85462A Receiver RF Section and 85460A RF Filter Section

HP/Agilent 8546A Features

• Traditional receiver features, including automatic overload detection and auto-ranging
• Three tuning modes: manual, stepped and scanning in log or linear format
• Onscreen limit lines
• Automatic antenna and cable correction for direct comparison of measurement data to limits
• Built-in measurement routines which speeds up testing
• Hardcopy output without a computer
• Simultaneous measurement of peak, quasi-peak, and average amplitude
• Tuning Range: Band 1: 9 kHz to 50 MHz, Band 2: 20 MHz to 2.9 GHz, Band 3: 1 GHz to 6.5 GHz
• Bypass: 9 kHz to 2.9 GHz (to 6.5 GHz)
• Agilent 85422E/85462A: 9 kHz to 2.9 GHz (to 6.5 GHz)

  HP/Agilent 8546A Standard Accessories

  Part Number	Description	Qty
  5010-7721	Limit Line and Antenna Factory Library Disk	1
  5062-3391	Handles	2
  1250-0780	Type-N (M) to BNC (F) Adapter	2
  ?	Power Cord	1
  8120-1838	BNC (M-M) Cable, 30 cm	1
  85642-80010	External Keyboard Template	1
  5962-0478	Installation and Verification Manual	1
  5962-0491	Reference Manual	1
  5962-5081	User's Guide	1
  5962-5083	Programmer's Guide	1

  OPTIONS***

  Option	description
  023	Substitute RS-232 Interface for GPIB
  0B1	Add Manual Set
  1CM	Rackmount Kit