|
HP/Agilent 8517B S-Parameter Test Set, 0.045 to 50 GHz, 2.4 mm
The Agilent 8517B test set has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch. For active device measurements, the test sets include the ability to apply dc bias (external) to the test port center conductors. Also available are two 60 dB step attenuators, which allow control of the port 1 and port 2 signal levels.
HP/Agilent 8517B Standard Accessories
| Part Number |
Description |
Qty |
| 08517-90054 |
Operating and Service Manual |
1 |
| 10833A |
GP-IB Cable |
1 |
| 08510-60102 |
Test Set Interconnect Cable |
1 |
| 08515-60003 |
Anti-Rotation Clamps |
2 |
| 1250-2188 |
2.4mm (F-F) Adapter |
1 |
| 8710-1764 |
20mm 90 N-cm (8 in-lb) Torque Wrench |
1 |
| 8710-1770 |
1/2" x 9/16" Open End Wrench |
1 |
| ? |
RF Source Cable, Bench-Top Configuration |
1 |
| ? |
RF Source Cable, Rack Configuration |
1 |
| ? |
Power Cord |
1 |
OPTIONS***
| Option |
description |
| 001 |
Add IF Switching |
| 002 |
Deletes Programmable Attenuators and Bias Tees |
| 004 |
Moves Port 2 Attenuator in front of b2 Sampler. Adds 3 dB Attenuator in Port 2 |
| 007 |
Add 5 Amplifiers, 2 10-dB Attenuators, 2 6-dB Attenuators and 2 Tapered Attenuators |
| 908 |
Rackmount |
|
